SI/AP-CH -gb

Chemical cleaning device for immersion probes, Mod.SI/AP-CH

Chemical cleaning system designed for the installation on immersion probes.
It can be used for measures of pH, ORP, conductivity, temperature and other parameters in fluids containing fatty or abrasive substances that can lower sensor sensitivity in a short time; the system also relieves operators from too frequent cleaning of sensors.
The SI/AP-CH1 system is made of PP and includes a nozzle, located under the sensor, that sprays the cleaning solution (water or water with a specific detergent) in order to achieve hydraulic and chemical cleaning of the sensor itself.
Mod.SI/AP-CH also includes the hose adapter for the connection to the tubing for cleaning solution.
The cleaning solution may be supplied by a solenoid valve or through a dosing pump.
In both cases the Mod.uP electronic unit can drive the cleaning sequence and actuate either the solenoid valve or the pump through a relay.
Connection to the cleaning solution: hose adapter (for polyethilene flexible hose)
Connection to immersion probe: threaded
Max. feeding pressure: 4 bar